Pallet Freight Class Chart (48 × 40 Pallets)

Find the LTL freight class of a standard 48 × 40 in pallet from its total height and weight. Each cell shows the weight range in pounds for that class under the 2025 13-tier NMFC density scale.

ClassDensity36 in
40.0 ft³
42 in
46.7 ft³
48 in
53.3 ft³
54 in
60.0 ft³
60 in
66.7 ft³
72 in
80.0 ft³
4000–10–390–460–530–590–660–79
3001–240–7947–9354–10660–11967–13380–159
2502–480–15994–186107–213120–239134–266160–319
1754–6160–239187–279214–319240–359267–399320–479
1256–8240–319280–373320–426360–479400–533480–639
1008–10320–399374–466427–533480–599534–666640–799
92.510–12400–479467–559534–639600–719667–799800–959
8512–15480–599560–699640–799720–899800–1,000960–1,199
7015–22.5600–899700–1,049800–1,199900–1,3491,001–1,4991,200–1,799
6522.5–30900–1,1991,050–1,3991,200–1,5991,350–1,7991,500–2,0001,800–2,399
6030–351,200–1,3991,400–1,6331,600–1,8661,800–2,0992,001–2,3332,400–2,799
5535–501,400–1,9991,634–2,3331,867–2,6662,100–2,9992,334–3,3332,800–3,999
5050+2,000+2,334+2,667+3,000+3,334+4,000+

Weights in pounds, total handling unit including the pallet. Applies to density-based NMFC items only; last reviewed 2026-11-18.

Different size? Estimate any pallet

Pallet charts by height

How to use the chart

  1. Measure the pallet at its tallest point, including the pallet itself, and round up to the next inch.
  2. Pick the nearest column (or the next taller one, to be safe).
  3. Find the row whose weight range contains your total pallet weight.

For non-standard footprints, overhang or several pallets, use the freight class calculator.

FAQ

What freight class is a standard pallet?

It depends on weight and height. A 48 × 40 × 48 in pallet (53.3 ft³) is Class 100 between 427 and 533 lb, Class 70 between 800 and 1,199 lb, and Class 50 at 2,667 lb or more. Lighter pallets fall into higher classes.

Does the pallet itself count?

Yes. Measure and weigh the whole handling unit, including the pallet (typically 5–6 in tall and 35–50 lb for a wooden GMA pallet).

Why does a taller pallet have a higher class?

Class is based on density. Adding height adds cubic feet; if the weight stays the same, density drops and the class number rises.